Skip to main content
All CollectionsKnowledgebase
Configure MP70 to send GPS data to Client connected by Wifi
Configure MP70 to send GPS data to Client connected by Wifi
Kultar avatar
Written by Kultar
Updated over 3 years ago

Step-by-step guide

  1. Enable Bridge Wi-Fi to Ethernet
    > AceManager > Wifi > SSID 1 (select SSID you are using)
    >Enable Wi-Fi to Ethernet : Enable


  2. Add IP to DHCP Reserve List.
    >AceManager> LAN> DHCP/Addressing> Reservation List
    > Add MAC Address and IP address (192.168.13.100) of the PC which is receiving GPS data.
    Please note you can find MAC address of the devices connected to MP70 under Status> LAN IP/MAC Table

  3. Enable Location Services Under Location

  4. Configure GPS
    > AceManager > Location > Local/Streaming > Local IP Report
    > Staring port Destination : 22335
    > Local Report Desitnation IP should be IP address of the PC.

Did this answer your question?