Semtech

Dynamic DNS allows an AirLink gateway’s WAN IP address to be published either to a proprietary Sierra Wireless dynamic DNS service called IP Manager, or to a 3rd party DNS service

In AceManager, go to Service &gt; Dynamic DNS -&gt; Select Dynamic DNS service

If you are using Sierra Wireless dynamic DNS service (eairlink.com) you can use the following settings: 

Domain = <a href="http://eairlink.com/" rel="nofollow noopener noreferrer" target="_blank">eairlink.com</a>

IP Manager Server 1 = <a href="http://edns1.eairlink.com/" rel="nofollow noopener noreferrer" target="_blank">edns1.eairlink.com</a>

Apply then reboot to save the configuration

- Enter device name: N66196005XXXXXX
- Domain = <a href="http://eairlink.com/" rel="nofollow noopener noreferrer" target="_blank">eairlink.com</a>
- IP Manager Server 1 = <a href="http://edns1.eairlink.com/" rel="nofollow noopener noreferrer" target="_blank">edns1.eairlink.com</a>
- IP Manager Server 2 = ends2.eairlink.com
- Apply then reboot to save the configuration

Note that, the device must have remote accessibility through WAN IP address. If not, it cannot be accessed using the associated FQDN

Verify configuration by performing ping the gateway’s WAN IP, and then ping to associated FQDN (ex:<a href="http://n66196005xxxxxx.eairlink.com/" rel="nofollow noopener noreferrer" target="_blank">N66196005XXXXXX.eairlink.com</a>)

- Note that, the device must have remote accessibility through WAN IP address. If not, it cannot be accessed using the associated FQDN
- Verify configuration by performing ping the gateway’s WAN IP, and then ping to associated FQDN (ex:<a href="http://n66196005xxxxxx.eairlink.com/" rel="nofollow noopener noreferrer" target="_blank">N66196005XXXXXX.eairlink.com</a>)